Legacy F4-2.5L DOHC Turbo (2005)
Clutch Release Fork: Service and Repair
Release Bearing and Lever
REMOVAL
1. Remove the transmission assembly from vehicle body.
2. Remove the two clips from clutch release lever and remove the release bearing.
CAUTION: Be careful not to deform the clips.
3. Remove the dust cover.
4. Remove the lever spring from pivot with a screwdriver by accessing it through the clutch housing release lever hole. Then remove the release
lever.
INSTALLATION
NOTE:
Before or during installation, lubricate the following points with a light coat of grease.
^
Contact surface of lever and pivot
^
Contact surface of lever and bearing
^
Transmission main shaft spline (Use grease containing molybdenum disulphide.)
1. While pushing the release lever to pivot and twisting it to both sides, fit the lever spring onto the constricted portion of pivot.
NOTE: