subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Harness Connectors|Page 4630 > < Air Bag Harness|Testing and Inspection
Page 1
background image

Air Bag Harness: Service and Repair
Harness Connectors

Airbag Harness to Body Harness

AIRBAG MAIN HARNESS TO BODY HARNESS CONNECTOR

How to disconnect:

1. Push lock arm (A) to let green lever (B) pop out.

2. Then separate the connector halves by pulling them apart while pressing lever (A).

CAUTION: When pulling, be sure to hold onto the connector and not the wire.

How to connect:

1. Insert the (A) connector half into the other until a "click" is heard.

2. Push in green lever (B) until a "click" is heard.

This engages the double lock mechanism.

CAUTION: Be sure to insert the connector in until it locks. Then pull on it gently to make sure that it is locked.

Airbag Main Harness

DRIVER'S AIRBAG, PASSENGER'S AIR-BAG, SIDE AIRBAG, FRONT SUB SENSOR HARNESS TO AIRBAG MAIN HARNESS AND
PRETENSIONER

How to disconnect:

Harness Connectors|Page 4630 > < Air Bag Harness|Testing and Inspection