Legacy F4-2.5L SOHC (2003)
Seat Belt: Service and Repair
Front Seat Belt
REMOVAL
OUTER BELT (FRONT)
1. Fold backrest all the way forward, and then move front seat all the way forward.
2. Turn ignition switch OFF, disconnect ground cable from battery, and wait for more than 20 seconds before starting work.
3. Remove center pillar lower trim.
4. Remove webbing guide.
5. Remove anchor cover. Loosen shoulder anchor bolt, and then detach shoulder anchor from center pillar.
6. Turn over the floor mat to remove bolt.
7. Disconnect yellow connector of pretensioner harness, and remove outer belt (front).
CAUTION: Do not drop or apply any impact to pretensioner.