Legacy F4-2.5L SOHC (2003)
Measure the maximum rotating speed and current under a no-load state.
-
Load test
Measure the magnitude of current needed to generate the specified torque and rotating speed.
-
Stall test
Measure the torque and current when the armature is locked.
1. No-load test
Under no-load state, measure its rotating speed and current, using the specified battery. Measured values must meet the following standards:
No-load test (Standard):
Voltage/Current 11 V / 90 A, or more
Rotating speed
228000-7131: 3,000 rpm, or more
228000-7141: 2,900 rpm, or more
2. Load test (For reference)
Perform this test to check maximum output of starter. Use test bench which is able to apply load (brake) to starter. Measure torque value and
rotating speed under the specified voltage and current conditions while controlling braking force applied to starter.
CAUTION: Change engagement position of overrunning clutch and make sure it is not slipping.
Load test (Standard):
228000-7131
Voltage/Load 8 V / 9.8 N.m (1.0 kgf-m, 7.2 ft-lb)
Current/Speed 280 A, or less / 900 rpm, or more
228000-7141
Voltage/Load 8 V / 13.7 N.m (1.4 kgf-m, 10.1 ft-lb)
Current/Speed 370 A, or less / 880 rpm, or more