Legacy F4-2.5L SOHC (2003)
11. Remove two bolts securing valve assembly.
12. Carefully draw out input shaft and remove valve assembly.
13. Using a sharp pointed pliers, rotate the rack stopper in the direction of the arrow until the end of the circlip comes out of the stopper. Rotate the
circlip in the opposite direction and pull it out.
14. Pull rack assembly from cylinder side, and draw out rack bushing and rack stopper together with rack assembly.
CAUTION: Be careful not to contact rack to inner wall of cylinder when drawing out. Any scratch on cylinder inner wall will cause oil leakage.
15. Remove rack bushing and rack stopper from rack assembly.
CAUTION: Do not reuse removed rack bushing and circlip.