Legacy F4-2.5L SOHC (2003)
Clutch: Service and Repair
Planetary Gear and Low Clutch
Planetary Gear and Low Clutch
REMOVAL
1. Remove the transmission assembly from the vehicle.
2. Extract the torque converter clutch assembly.
3. Remove the input shaft.
4. Disconnect the air breather hose.
5. Lift-up lever behind the transmission harness connector and disconnect from stay.
6. Disconnect inhibitor switch connector from stay.
7. Remove the oil charger pipe, and remove the O-ring from the flange face. Attach the O-ring to the pipe.
8. Remove the oil cooler inlet and outlet pipes.
9. Remove rear vehicle speed sensor, and separate the transmission case and extension case.
10. Remove reduction driven gear.
11. Separation of torque converter clutch case and transmission case.
12. Remove the oil pump housing.
13. Take out the high clutch and reverse clutch assembly.
14. Take out the front sun gear and the thrust bearing.
15. Pull out leaf spring without folding.
NOTE: Remove it while pressing down on lower leaf spring.