Legacy F4-2.5L SOHC (2003)
Shift Interlock Switch: Testing and Inspection
Inhibitor Switch
REMOVAL
1. Set the vehicle on a lift.
2. Move the select lever to "N" range.
3. Remove the air cleaner case. (2.5 L model)
4. Remove air intake chamber. (3.0 L model)
5. Disconnect the inhibitor switch connector.
6. Remove the inhibitor switch connector from stay.
7. Lift-up the vehicle.
8. Remove the front and center exhaust pipes.
9. Remove the snap pin and washer from range select lever.
10. Remove the plate assembly from transmission case.