Legacy F6-3.0L (2005)
4. Install the pad on support.
NOTE: Install the pad indicator in proper direction.
CAUTION:
^
Be sure to install so that the direction of pad return spring faces to the input side of brake rotor rotation direction as shown in the figure.
^
Correctly install the pad return spring to supporting surface of pad clip as shown in the figure.
^
When the pad return spring is deformed or damaged, replace the brake pad with new one.
5. Install the caliper body on support.
Tightening torque: 27 Nm (2.8 kgf-m, 19.9 ft. lbs.)
