Legacy F6-3.0L (2005)
COMPONENT
REMOVAL
NOTE: Before removing the oil pan upper, remove the engine from vehicle.
1. Set the vehicle on a lift.
2. Lift-up the vehicle.
3. Remove the under cover.
4. Drain the engine oil.
5. Insert the oil pan cutter blade between oil pan upper and oil pan lower.
CAUTION: Do not use a screwdriver or similar tool in place of oil pan cutter.
6. Remove the oil pan lower.
7. Remove the oil strainer.
INSTALLATION
CAUTION: Before installing the oil pan, wipe clean the mating surface of oil pan lower and oil pan upper.