Legacy F6-3.0L (2005)
Brake Light Switch: Adjustments
ADJUSTMENT
Loosen the lock nut, and adjust the stop light switch position until the clearance between the threaded end of the stop light switch and stopper (A)
becomes 0.3 mm (0.012 inch). Then, tighten the lock nut.
NOTE: Tighten the lock nut B until the clearance between the threaded end of stop light switch and stopper becomes 0 mm (0 inch). Hold the stop
light switch to prevent turning, and then loosen the lock nut B approx. 60°. The clearance (A) becomes 0.3 mm (0.012 inch).