subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Campaign - A/C Filtration System Update|Page 777 > < Campaign - A/C Filtration System Update|Page 775
Page 6
background image

2)

Insert the NEW filter (PN: G3210AG000) into the NEW filter carrier (PN: 73553AG02B).

3)

Push the carrier and the filter into the housing with a slight twist until its fully seated.

CAUTION:

Carrier tabs may be susceptible to breakage (from over bending) when coming into contact with other parts of the vehicle.

Part Three - Reinstallation of the Glove Box Assembly

1)

Follow steps 1 to 14, in Part 1, in reverse order.

Part Four - Label Installation

1) Fill in the maintenance label with the replacement date and mileage.

2)

Install it on the right hand side of the glove box as shown.

Note:

The label is shown here:

-

The filter must be replaced every 7,500 miles or 1 year, whichever occurs first.

-

The filter may need to be replaced more frequency in dusty areas.

SERVICE PROGRAM IDENTIFICATION LABEL

Campaign - A/C Filtration System Update|Page 777 > < Campaign - A/C Filtration System Update|Page 775