Legacy F6-3.0L (2005)
2. WITH SUBARU SELECT MONITOR
For detailed procedures of clearing DTC, refer to "SUBARU SELECT MONITOR". See: Scan Tool Testing and Procedures
With Generic Scan Tool
Manufacturer does not supply procedure for Clearing Trouble Codes with generic scan tool.
Without Scan Tool
Manufacturer does not provide procedure for Clearing Trouble Codes without scan tool.
Diagnostic Trouble Code Descriptions
For information regarding B, C, P, U and Manufacturer Code Descriptions - See: Testing and Inspection/Diagnostic Trouble Code Descriptions
Diagnostic Trouble Code Tests and Associated Procedures
For information regarding B, C, P, U and Manufacturer Codes - See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures
Communication For Initializing Impossible
COMMUNICATION FOR INITIALIZING IMPOSSIBLE
NOTE:
-
DTC is displayed in the sequence of the amount of counter numbers.
-
When more than two DTCs are displayed, perform the diagnosis of top of them.
DIAGNOSIS:
Subaru Select Monitor communication line is open or shorted.
TROUBLE SYMPTOM:
Not communicable with Subaru Select Monitor.