Legacy F6-3.0L (2005)
Transmission Speed Sensor: Service and Repair
Front Speed Sensor
Front Vehicle Speed Sensor
REMOVAL
1. Remove the transmission assembly from vehicle.
2. Remove the rear vehicle speed sensor.
NOTE: Secure the harness of the rear vehicle speed sensor to the transmission proper using wire etc.
3. Remove the extension case.
4. Remove the intermediate case.
5. Remove the center differential carrier.
6. Lay along the transmission case, and then remove the oil pan.
7. Remove the old gasket on the oil pan and transmission case completely.
8. Disconnect the front vehicle speed sensor connector.