Legacy F6-3.0L (2005)
1. Place the oil pump bracket in a vise. Tighten the bushing using a 12.7 mm (1/2") type 14 and 21-mm box wrench until it is in contact with oil
pump mounting surface.
CAUTION: When securing the oil pump bracket in a vise, hold the oil pump bracket with the least possible force between two wood pieces.
2. Tighten the bolt which holds the oil pump to bracket.
Tightening torque: 15.7Nm (1.6 kgf-cm, 11.6 ft. lbs.)
Tightening torque: 37.3 Nm (3.8 kgf-cm 27.5 ft. lbs.)