Legacy F6-3.0L (2005)
Windshield Washer Reservoir: Service and Repair
Removal and Installation
Washer Tank and Motor
REMOVAL
1. Open the hood.
2. Disconnect the ground cable from battery.
3. Remove the front bumper.
4. Remove the clip holding washer water supply tap.
5. Remove the two bolts and one nut, hose, connector and washer motor cover, and then remove the washer tank.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 6.0 N.m (0.61 kgf-m, 4.4 ft-lb)