Legacy Brighton Wagon AWD F4-2.2L SOHC (1997)
6) Temporarily install clamp E on pipes C and D.
CAUTION: Ensure that the letter "8" on each clamp side are diagonally opposite each other as shown in the figure.
7) Tighten clamp E firmly.
Tightening torque:
7.4 ± 2.0 Nm (0.75 ± 0.20 kg-m, 5.4 ± 1.4 ft-Ib)
8) Tighten joint nut.
Tightening torque:
15 ± 5 Nm (1.5 ± 0.5 kg-m, 10.8 ± 3.8 ft-Ib)
9) Connect pipes A and B to four pipe joints of gearbox.
Connect upper pipe B first, and lower pipe A second.
Tightening torque:
13 ± 3 Nm (1.3 ± 0.3 kg-m, 9.4 ± 2.2 ft-Ib)
10) Install jack-up plate.
11) Connect battery minus terminal.
12) Feed the specified fluid and discharge air.
NOTE: Never start the engine before feeding the fluid; otherwise vane pump might be seized up.