Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
4. Remove two nuts of both sides and then detach bumper assembly.
5. Remove eight clips and then disconnect upper beam (A) from bumper face (B).
6. Remove resin beam.
7. Installation is in the reverse order of removal.
CAUTION:
-
Be extremely careful to prevent scratches on bumper face as it is made of resin.
-
Be careful not to scratch the body when removing or installing bumper.
-
To facilitate installation of rear bumper, attach slider (A) to the guide pin (B).
2. WAGON BODY
1. Remove trailer hitch. (with trailer hitch vehicles)
