subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Body and Frame|Grille > < Recall 03V153000: Frame Corrosion Issue
Page 1
background image

Trailer Hitch: Service and Repair

1. Lift-up the vehicle.

2. Disconnect rubber cushion from body.

NOTE:  To facilitate removal, apply a coat of SUBARU CRC to mating area of rubber cushions in advance. 
SUBARU CRC (Part No.004301003.

3. Cut the strap (a).

4. Remove bolts and then detach trailer hitch while lowering the muffler.

CAUTION:  Two people are required to do this procedure.

5. Installation is in the reverse order of removal.

NOTE:
-

Securely fasten trailer hitch harness using a strap.

-

Be sure to set the bolt in position as shown in the figure.

Tightening torque:
68 N.m (6.9 kg.m, 50 ft.lb)

Body and Frame|Grille > < Recall 03V153000: Frame Corrosion Issue