Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
2. Slowly move the adjuster rod down with a pressure of 294 Nm (30 kg, 66 lb) until the adjuster rod is aligned with the stopper pin hole in the
cylinder.
3. With a 2 mm (0.08 in) dia. stopper pin or a 2 mm (0.08 in) (nominal) dia. hex bar wrench inserted into the stopper pin hole in the cylinder,
secure the adjuster rod.
2. Install automatic belt tension adjuster assembly.
Tightening torque: ............................................................................................................................ 39+/-4 Nm (4.0+/-O.4 kg-m, 28.9+/-2.9 ft-lb)
3. Install belt idler (No.1).
Tightening torque: ............................................................................................................................ 39+/-4 Nm (4.0+/-O.4 kg-m, 28.9+/-2.9 ft-lb)
TIMING BELT