subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Maintenance Required Lamp/Indicator > < General Precautions For SRS Service|Page 5668
Page 1
background image

Low Fuel Lamp/Indicator: Description and Operation

OPERATION

Low fuel warning light operation
The ECM continually monitors the resistance signal input from the fuel level sensor, and turns on the low fuel warning light in the combination
meter when the resistance value corresponding to the critical fuel level (approx. 76 Ohm) is registered successively for about 10 minutes or during
10 km driving.
In this system, therefore, an erroneous warning of low fuel level is avoided which may happen when a large part of remaining fuel is collected
temporarily in the sub-tank.

Maintenance Required Lamp/Indicator > < General Precautions For SRS Service|Page 5668