Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
![background image](/subaru/legacy_brighton_wagon_awd/f4-2.5l_sohc/Page-1208002.png)
NOTE: Also check connector terminals, wiring harness, case, etc. for damage.
CHECK: Is there anything unusual about the appearance of airbag component parts?
YES:
Replace faulty airbag component parts.
NO:
Go to step
5AB2.
5AB2: AIRBAG COMPONENT PARTS VIBRATION INSPECTION
1. Gently shake check parts (to determine faults.).
2. To check airbag module or roll connector, turn and tilt steering wheel.
CAUTION: Do not shake or vibrate airbag control module.
CHECK: Does the component malfunction again when shaking?
YES:
Replace faulty airbag component parts.
NO:
Go to step
5AB3.
5AB3: SHOWING INSPECTION TO BODY
Spray water on vehicle body.
CAUTION: Do not directly spray water on airbag components.
NOTE: Also check wiring harnesses as water may leak along them and get airbag component parts wet.
CHECK: Does water leak into the passenger compartment when showering vehicle?
YES:
Replace faulty airbag component parts.
NO:
Perform clear memory.