Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
![background image](/subaru/legacy_brighton_wagon_awd/f4-2.5l_sohc/Page-1236002.png)
Measure resistance across test harness I or I2 connector (3I) terminal and test harness F connector (3F) terminal.
CHECK: Is the resistance less than 10 ohms?
YES:
Go to step 5V4.
NO:
Replace side airbag harness.
5V4: SIDE AIRBAG HARNESS SHORTED CIRCUIT INSPECTION
Measure resistance between test harness I or I2 connector (3I) terminal.
CHECK: Is the resistance more than 1 M ohms?
YES:
Go to step 5V5.
NO:
Replace side airbag harness.
5V5: SIDE AIRBAG HARNESS SHORTED TO GROUND CIRCUIT INSPECTION
Measure resistance between test harness I or I2 connector (3I) terminal and chassis ground.
CHECK: Is the resistance more than 1 M ohms?