Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
1. No-load test
Run single starter under no-load state, and measure its rotating speed, voltage, and current, using the specified battery. Measured values must
meet the following standards:
No-load test (Standard):
Voltage/Current
11 V/90 A, or more Rotating speed
TN128000-8311: 3,000 rpm, or more
TN128000-8321: 3,350 rpm, or more
2. Load test (For reference)
Perform this test to check maximum output of starter. Use test bench which is able to apply load (brake) to starter. Measure torque value and
rotating speed under the specified voltage and current conditions while controlling braking force applied to starter.
CAUTION: Change engagement position of overrunning clutch and make sure it is not slipping.
Load test (Standard):
TN128000-8311
Voltage/Load
8 V/9.8 N.m (1.0 kg.m, 7.2 ft.lb)
Current/Speed
280 A max./900 rpm mm.
TN128000-8321
Voltage/Load
8 V/13.7 N.m (1.4 kg.m, 10.1 ft.lb)
Current/Speed
370 A, or less/880 rpm, or more
3. Stall test