Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
4. Interconnect pipes C and suction hose.
Tightening torque:
Joint nut 39.2 ± 4.9 Nm (4 ± 0.5 kg-m, 28.9 ± 3.6 ft. lbs.)
CAUTION: If a hose is twisted at this step, the hose may come into contact with some other parts.
5. Connect connector to power steering oil pressure switch.
6. Install pulley belt to oil pump.
7. Check pulley belt tension.
8. Tighten bolt belt tension.
Tightening torque: 2 Nm (0.8 ± 0.2 kg-m, 5.8 ± 1.4 ft. lbs.)
9. Install pulley belt cover bracket.
10. Connect minus terminal of battery.
11. Feed the specified power steering fluid and discharge air.
CAUTION: Never start the engine before feeding the fluid; otherwise vane pump might be seized up.