Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
1. Insert ST from pinion housing side and remove oil seal using a press.
ST 34199AE050 REMOVER OIL SEAL
NOTE: Discard removed oil seal.
2. Force-fit oil seal using ST.
ST 34199AE060 INSTALLER
CAUTION: Be careful not to damage or scratch cylinder inner wall.
NOTE:
-
Apply specified power steering fluid to oil seal.
-
Pay special attention not to install oil seal in wrong direction. Push oil seal until the stepped portion of A contacts end face of B.
ASSEMBLY
RACK ASSEMBLY
CAUTION: Use only SUBARU genuine grease for gearbox.
Specified grease for gearbox: VALIANT GREASE M2
1. Fixing rack housing