Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
-
During acceleration or usual driving.
Since the clutch pedal is not depressed, the pushrod is located outside the port. In this status, hydraulic pressure cannot he maintained.
-
During deceleration.
Even when depressing the clutch pedal, the ball is kept at the front by decelerating force. In this status. hydraulic pressure is not
maintained.
b) When stopping.
Even when stopping on an uphill road, hydraulic pressure is not maintained unless the clutch pedal is depressed.
c) On a flat road
This device is not designed to operate on a flat road, except for reversing.
4. Operational Precautions
a) The hill-holder is a device used to facilitate starting on an uphill road. When stopping on an uphill road, therefore, you must keep the brake
pedal depressed or pull the parking brake.
b) The hill-holder may not be activated on a slope of an extremely small incline.
c) If the brake is not held sufficiently upon releasing the brake pedal with the clutch pedal depressed, press down the brake pedal a little more
strongly once again.
d) If the clutch pedal is depressed again in the course of the starting operation, the brake may be released. In this case, depress the brake pedal
again. (Because the brake is released when returning the clutch pedal halfway.) (For example, when interrupting starting operation or shifting
gear from other than LOW because of misoperation.)
e) Before you leave the driver's seat, be sure to pull the parking lever and confirm that the vehicle is kept stopped upon releasing the clutch pedal.
f) When reversing the vehicle on a flat road, the following phenomena may be felt. These phenomena are caused by the activation of the hill
