Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
Limit: 1.0 mm (0.039 inch)
5) After engine coolant pump installation, check pulley shaft for engine coolant leaks. If leaks are noted, replace engine coolant pump assembly.
C: INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
Replace gasket with a new one.
-
When installing engine coolant pump, tighten bolts in two stages in numerical sequence as shown in figure.
Tightening torque: 10 +4-0 Nm (1.0 +4-0 kg-m, 7.2 +2.9-0 ft. lbs.)