Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
Air Bag Control Module: Service and Repair
Airbag Control Module
REMOVAL AND INSTALLATION
CAUTION:
-
Do not disassemble the airbag control module.
-
If the airbag control module is deformed, or if water damage is suspected, replace the airbag control module with a new genuine part.
-
After removal, keep the airbag control module on a dry, clean surface away from heat and light sources, and moisture and dust.
1. Turn ignition switch off.
2. Disconnect ground cable from battery and wait for at least 20 seconds before starting work.
3. Remove lower cover. Disconnect airbag connector (AB3) and (AB8) below steering column.