Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
YES: Go to step 27B3
NO: Replace G sensor.
27B3: CHECK G SENSOR
Measure voltage between G sensor connector terminals.
Connector & terminal (P11) No. 2 (+)-No. 3 (-)
CHECK: Is the voltage 0.7+0.2 V when G sensor is inclined backwards to 90°?
YES: G sensor is normal.
NO: Replace G sensor.
C: INSPECTION WITH SELECT MONITOR
27C1: CHECK G SENSOR
1. Turn ignition switch to OFF.
2. Connect select monitor connector to data link connector.
3. Turn select monitor into {ABS/TCS} mode.
4. Set the display in the {Current Data Display & Save} mode.
5. Read the G sensor output voltage.
CHECK: Is the indicated reading 2.3+/-0.2 V when the vehicle is in horizontal position?
YES: Go to step 27C2.
NO: Replace G sensor.
27C2: CHECK G SENSOR
1. Remove console box.
2. Remove G sensor from vehicle. (Do not disconnect connector.)
3. Read the select monitor display.
CHECK: Is the indicated reading 3.9+/-0.2 V when G sensor is inclined forwards to 90° ?
YES: Go to step 27c3
NO: Replace G sensor.