Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
Clutch Release Bearing: Service and Repair
A: REMOVAL
1. Remove transmission assembly from vehicle body.
2. Remove operating cylinder (1).
3. Remove the two clips (2) from clutch release lever (3) and remove release bearing (6).
CAUTION: Be careful not to deform clips.
4. Remove release lever seal (4).
5. Remove release lever retainer spring from release lever pivot with a screwdriver by accessing it through clutch housing release lever hole. Then
remove release lever.
B: INSTALLATION
1. While pushing release lever (1) to pivot and twisting it to both sides, fit retainer spring (2) onto the constricted portion of pivot.
NOTE:
Confirm that retainer spring is securely fitted by observing it through the main case hole.