Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
![background image](/subaru/legacy_gt_ltd_sedan_awd/f4-2.5l_dohc/Page-1365002.png)
7. Remove front exhaust cover.
8. Remove differential mount front cover.
9. Remove the four bolts which hold propeller shaft to rear differential.
NOTE:
-
Put matching mark on affected parts before removal.
-
Remove all but one bolt.
10. Remove the two bolts which hold center bearing to vehicle body.
11. Remove propeller shaft from transmission.
CAUTION: Be sure not to damage oil seals and the frictional surface of sleeve yoke.