Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
ST2 927460000 OIL SEAL INSTALLER
6) Invert both ST1 and housing.
7) Using ST2, press inner oil seal into housing until it touches bottom.
ST1 927430000 HOUSING STAND
ST2 927460000 OIL SEAL INSTALLER
8) Using ST1 and ST2, press sub seal into place.
ST1 927430000 HOUSING STAND
ST2 927460000 OIL SEAL INSTALLER
9) Apply sufficient grease to oil seal lip.
Specified grease:
SHELL 6459N
CAUTION:
-If specified grease is not available, remove bearing grease and apply Auto Rex A instead.
-Do not mix different types of grease.
10) Install back plate to rear housing.
Tightening torque:
52 ± 6 N.m (5.3 ± 0.6 kg-m, 38.3 ± 4.3 ft-lb)