subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Relays and Modules - Brakes and Traction Control > < Without Using Gauges|Page 4621
Page 3
background image

CAUTION:  Be careful not to rotate stop light Switch

9. Apply grease to operating rod connecting pin to prevent it from wearing.

10. Bleed air from brake system.

Tightening torque (Air bleeder screw):
8 Nm (0.8 kgf-m, 5.8 ft. lbs.) 

11. Conduct road tests to ensure brakes do not drag.

Relays and Modules - Brakes and Traction Control > < Without Using Gauges|Page 4621