Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Valve Clearance: Testing and Inspection
A: INSPECTION
CAUTION: Inspection and adjustment of valve clearance should be performed while engine is cold.
1. Set the vehicle onto the lift.
2. Lift-up the vehicle.
3. Remove under cover.
4. Disconnect battery ground cable.
5. Lower the vehicle.
6. Remove timing belt cover (LH).
7. Remove rocker cover.
8. When inspecting #1 and #3 cylinders;
1) Remove bolt which secures air intake duct to radiator panel side.
2) Remove air intake duct as a unit.