Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Repairs and Inspections Required After a Collision: Service and Repair
Airbag Systems
Inspection Locations After a Collision
INSPECTION
If the vehicle is involved in a collision on any side, even if it is a slight collision, be sure to check the following system parts.
AIRBAG MODULE (DRIVER)
1. Check for the following, and replace damaged parts with new parts.
-
Airbag module is cracked or deformed.
-
Harness and/or connector is cracked, deformed or open. Lead wire is exposed.
-
Mounting bracket is cracked or deformed.
-
The module surface is fouled with grease, oil, water or cleaning solvent.
2. When installing a new driver's airbag module, check the following. If necessary, install a new airbag module and steering wheel.
-
The steering wheel is in the way, making it difficult to install the airbag module.
-
The clearance between the driver's airbag module and steering wheel is not constant.
-
Free play of the steering wheel is over specifications in axial and radial directions.
AIRBAG MODULE (PASSENGER)
Check for the following, and replace damaged parts with new parts.
-
Airbag module is cracked or deformed.
-
Harness and/or connector is cracked, deformed or open. Lead wire is exposed.
-
Mounting bracket is cracked or deformed.
-
The module surface is fouled with grease, oil, water or cleaning solvent.
AIRBAG MODULE (SIDE)
Check for the following, and replace damaged parts with new parts.
-
Front seat is damaged or deformed.
-
Harness and/or connector is cracked, deformed or open.
-
Lead wire is exposed.
AIRBAG CONTROL MODULE
Check for the following, and replace damaged parts with new parts.
-
Control module is cracked or deformed.
-
Mounting bracket is cracked or deformed.
-
Connector is scratched or deformed.
-
Airbag is deployed.
-
Side airbag deployed.