Legacy GT Wagon AWD F4-2.5L DOHC (1997)
CAUTION: If excessive deflection is noted, replace bushings with new ones.
Accelerator Pedal
Lightly move pedal pad in lateral the direction to ensure pedal deflection is in specified range.
Deflection of accelerator pedal:
Service limit
5.0 mm (0.197 in) or less
CAUTION: If excessive deflection is noted, replace bushing and clip with new ones.
Stop Light Switch
If stop light switch does not operate properly (or if it does not stop at the specified position), replace with a new one.
Specified position: L
2.8 +1.5/0 mm (0.110 +0.059/0 in)
Assembly
ASSEMBLY
Brake And Clutch Pedal
1) Attach stop light switch, etc. to pedal bracket temporarily.
2) Clean inside of bores of clutch pedal and brake pedal, apply grease, and set bushings into bores.
3) Align bores of pedal bracket, clutch pedal and brake pedal, attach brake pedal return spring and clutch pedal effort reducing spring (vehicle with
hill holder), and then install pedal bolt.