Legacy GT Wagon AWD F4-2.5L DOHC (1997)
2) Set arrow mark on camshaft sprocket to position shown in figure, and measure #2 cylinder intake valve and #4 cylinder exhaust valve
clearances.
3) Set arrow mark on camshaft sprocket to position shown in figure, and measure #1 cylinder exhaust valve and #4 cylinder intake valve
clearances.
15) After inspection, install the related parts in the reverse order of removal.
ADJUSTMENT
CAUTION: Adjustment of valve clearance should be performed while engine is cold.
1) Measure all valve clearances.
NOTE: Record each valve clearance after it has been measured.
2) Remove shim of intake side.
1) Prepare the Special Tool (ST).
ST 498187100 SHIM REPLACER KIT