Legacy GT Wagon AWD F4-2.5L DOHC (1997)
Wheel Speed Sensor: Service and Repair
Removal
Front ABS Sensor
FRONT ABS SENSOR
1) Disconnect front ABS sensor connector located in engine compartment.
2) Remove bolts which secure sensor harness to strut.
3) Remove bolts which secure sensor harness to body.
4) Remove bolts which secure front ABS sensor to housing, and remove front ABS sensor.
CAUTION:
-
Be careful not to damage pole piece located at tip of the sensor and teeth faces during removal.
-
Do not pull sensor harness during removal.
5) Remove front disc brake caliper and disc rotor from housing after removing front tire.
6) Remove front drive shaft and housing and hub assembly.