Legacy GT Wagon AWD F4-2.5L DOHC (1997)
4. When using Subaru Select Monitor;
a. Connect Subaru Select Monitor (SSM) to the data link connector.
b. Turn ignition switch to "ON" and SSM switch to "ON'.
c. Select mode "F10".
d. Adjust throttle position sensor to specified data.
Condition: Throttle Fully Closed
Specified Data: 0.50 Volt
e. Tighten throttle position sensor holding screws.
Tightening Torque: 2.2 ± 0.2 N.m (1.6 ± 0.1 ft-lb).