Legacy GT Wagon AWD F4-2.5L DOHC (1997)
Lateral Stabilizer Rod: Service and Repair
Installation
INSTALLATION
To install, reverse removal procedures, reading the following instructions.
CAUTION:
-
Always tighten rubber bushing when wheels are in full contact with the ground and vehicle is at curb weight condition.
-
Tighten nut when installing adjusting bolt.
-
Replace self-locking nut and DOJ circlip with new ones.
NOTE:
-
Lateral link washers for FWD and AWD models can be identified by colors, as follows:
Olive (FWD model)
Gold (AWD model)
-
Check wheel alignment and adjust if necessary.