Legacy GT Wagon AWD F4-2.5L DOHC (1997)
![background image](/subaru/legacy_gt_wagon_awd/f4-2.5l_dohc/Page-1292003.png)
5. Adjust the position of shift-lock plate and solenoid. Then, tighten bolts.
6. Assemble indicator to the plate
Tightening Torque: 1.6 +/-0.4 Nm (1.18 +/-0.30 ft. lbs.).
7. Assemble the following parts to the grip.
(1) Button
(2) Spring
CAUTION: Apply grease on sliding surfaces of the following parts.
8. Assemble the grip to the selector lever.
9. After completion of fitting, transfer selector lever to range "P" ~ "1", pressing the button of the grip; then check whether the indicator and select
lever agree, whether the pointer and position mark agree and what the operating force is.