Legacy GT Wagon AWD F4-2.5L DOHC (1997)
Radial direction stroke: Approximately 1.4 mm (0.055 inch).
2. Check the bearing for smooth rotation by applying pressure in the thrust direction
3. Check wear and damage of bearing case surface contacting with lever.
Release Lever
Check lever pivot portion and the point of contact with release bearing case for wear
INSTALLATION
CAUTION: Before or during assembling, lubricate the following points with a light coat of grease.
-
Inner groove of release bearing
-
Contact surface of lever and pivot
-
Contact surface of lever and bearing
-
Transmission main shaft spline (Use grease containing molybdenum disulphide.)
1. While pushing release lever 3 go to pivot and twisting it to both sides, fit retainer spring 5 onto the constricted portion of pivot.
NOTE: Confirm that retainer spring is securely fitted by observing it through the main case hole.
2. Install release bearing 6 and fasten it with two clips
3. Install weight release lever 7.