Legacy GT Wagon AWD F4-2.5L DOHC (1997)
Drive/Propeller Shaft: Service and Repair
Front and Rear Drive Shafts
Disassembly
FTJ (Free-ring Tripod Joint)
1) Place alignment marks on shaft and outer race.
2) Remove FTJ boot band and boot.
CAUTION: Be careful not to damage boot.
3) Remove circlip from FTJ outer race using screwdriver.
4) Remove FTJ outer race from shaft assembly.
5) Wipe off grease.
CAUTION: The grease is a special grease. Do not confuse with other greases.