Legacy GT Wagon AWD F4-2.5L DOHC (1997)
CAUTION:
-
Wrap clutch splined section with vinyl tape to prevent damage to oil seal.
-
Apply grease (Unilube #2 or equivalent) to the sealing lip of oil seal.
NOTE:
-
Align the end face of seal with surface A of left side transmission main case when installing oil seal.
-
Be careful not to drop oil seal when installing right side transmission main case.
-
Make sure straight pin is positioned in hole in needle bearing's outer race.
5. Install drive pinion shaft assembly (5) with shims selected before into transmission case.
NOTE: Ensure that the knock pin of the case is fitted into the hole in the bearing outer race.