Legacy L Wagon AWD F4-2.5L SOHC (2001)
6. Loosen clips to remove upper beam (A) from bumper face.
7. Remove resin beam.
2. WAGON
CAUTION:
-
Handle bumper carefully to avoid damage to bumper face.
-
Do not damage body during removal or installation of bumper.
-
To avoid damage to bumper, lay removed bumper on sheet spread on the floor. Do not lay it directly on the floor.
1. Lift-up the vehicle.
2. Remove trailer hitch.
3. Remove bolts and clips.
4. Remove rear floor box. <Ref. to REMOVAL, Rear Quarter Trim.>
5. Pull off rear end of rear quarter lower trim to remove cap.