Legacy Outback Limited AWD F4-2.5L DOHC (1998)
(CHECK Is resistance less than 1 ohm?
(YES) Go to step 1A15.
(NO) Repair open circuit in harness between A/C relay holder and main fan motor connector.
1A15: CHECK HARNESS CONNECTOR BETWEEN A/C RELAY HOLDER AND MAIN FAN MOTOR.
Measure resistance of harness connector between A/C relay holder and main fan motor.
Connector & terminal (F30) No.4- (F17) No.3:
(CHECK) Is resistance less than 1 ohm?
(YES) Go to step 1A16.
(NO) Repair open circuit in harness between A/C relay holder and main fan motor connector.
1A16: CHECK POOR CONTACT.
Check poor contact in A/C relay holder connector.
(CHECK) Is there poor contact in A/C relay holder connector?
(YES) Repair poor contact in A/C relay holder connector.
(NO) Go to step 1A17.
1A17CHECK POOR CONTACT.
Check poor contact in main fan motor connector.
(CHECK) Is there poor contact in main fan motor connector?
(YES) Repair poor contact in main fan motor connector.
(NO) Refer to "On-Board Diagnostics II System" diagnostics procedure.