Legacy Outback Limited AWD F4-2.5L DOHC (1998)
4) Rocker cover installation
1) Install gasket on rocker cover, Install peripheral gasket and ignition coil gasket.
2) Apply fluid packing to four front open edges of peripheral gasket.
Fluid packing: THREE BOND 1215 or equivalent
3) Install rocker cover on cylinder head. Ensure gasket is properly positioned during installation.
5) Install ignition coil.
6) Install cam angle sensor.
7) Similarly, install parts on right-hand side.
Related Parts
Install timing belt, camshaft sprockets and related parts.