subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Warning Light Indicates DTC, Then Normal Code (Test #1)|Page 5016 > < Air Bag Warning Light <--> [Malfunction Lamp / Indicator, Air Bag]|Description and Operation
Page 1
background image

Air Bag Warning Light: Testing and Inspection
Warning Light Indicates DTC, Then Normal Code (Test #1)

AA-Warning Light Indicates Trouble Code, Then Normal Code (Flashing Trouble Code).

DIAGNOSIS:  Airbag system component parts are faulty.

CAUTION:  Before performing diagnostics on airbag system, turn ignition switch "OFF", disconnect battery ground cable, and then wait at least 20
seconds.

5AA1:

AIRBAG COMPONENT PARTS APPEARANCE INSPECTION
1. Conduct on-board diagnostic and call up trouble codes stored in memory.

2. Select trouble code required to check airbag component pants from those listed in table and reproduce symptom.
3. Conduct appearance inspection on parts selected.

NOTE:  Also check connector terminals, wiring harness, case, etc. for damage.

Warning Light Indicates DTC, Then Normal Code (Test #1)|Page 5016 > < Air Bag Warning Light <--> [Malfunction Lamp / Indicator, Air Bag]|Description and Operation