Legacy Outback Ltd Sedan F4-2.5L SOHC (2000)
Catalytic Converter: Description and Operation
-
The basic material of three-way catalyst is platinum (Pt), rhodium (Rh) and palladium (Pd), and a thin coat of their mixture is applied onto
honeycomb or porous ceramics of an oval shape (carrier). To avoid damaging the catalyst, only unleaded gasoline should be used.
-
The catalyst is used to reduce HC, CO and NOx in exhaust gases, and permits simultaneous oxidation and reduction. To obtain an excellent
purification efficiency on all components HC, CO and NOx, a balance should be kept among the concentrations of the components. These
concentrations vary with the air-fuel ratio.
-
The air-fuel ratio needs to be controlled to a value within the very narrow range covering around the stoichiometric mixture ratio to purify the
components efficiently.
