Legacy Outback Ltd Sedan F4-2.5L SOHC (2000)
Windshield Washer Spray Nozzle: Technical Service Bulletins
Wipers/Washers - Front Washer Nozzle Won't Spray
FRONT WASHER NOZZLE DOES NOT SPRAY PROPERLY
Failure of the front washer nozzle to spray properly may be caused by something blocking the nozzle outlet. Try to eliminate dust and foreign matter
from front washer nozzle using the following procedure. If the washer nozzle spraying does not change after the repair, then it will be necessary to
replace with a new nozzle or inspect other parts on the washer system.
1) Open the front hood
2) Remove the washer nozzle
3) Blow compressed air in the spray hole of the washer nozzle and the installation hole for washer hose to eliminate dust and foreign matter.
4) Install the hose to washer nozzle and install the washer nozzle.
5) Check if front washer sprays properly. If no change, replace with a new nozzle.
A Technical Service Bulletin will be forthcoming with additional information on this subject.